Welcome to the Podiatry Arena forums, for communication between foot health professionals about podiatry and related topics.
You are currently viewing our podiatry forum as a guest which gives you limited access to view all podiatry discussions and access our other features. By joining our free global community of Podiatrists and other interested foot health care professionals you will have access to post podiatry topics (answer and ask questions), communicate privately with other members (PM), upload content, view attachments, receive a weekly email update of new discussions, earn CPD points and access many other special features. Registered users do not get displayed the advertisments in posted messages. Registration is fast, simple and absolutely free so please, join our global Podiatry community today!
If you have any problems with the registration process or your account login, please contact contact us.
BACKGROUND: The effectiveness of total contact casts is postulated to be due to the reduction of plantar pressure. We investigated plantar loads to evaluate the mechanism by which total contact casts off-load the plantar surface of the foot to determine if it is the intimate molding of the weightbearing plantar surface or if a below-knee cast is necessary.
METHODS: Plantar pressures and forces in a total contact cast (TCC) were recorded in 12 healthy subjects, using the Pedar (Novel GmbH, Munich, Germany) pedobarographic system. The measurements were repeated after removal of the 'shank' portion of the cast (proximal to malleoli), leaving in effect, a well-molded shoe-cast (SC). Measurements included average force and peak pressure. All parameters were measured under two different loading conditions: single-leg standing balanced on the casted limb and over-ground walking. To assess the contribution of calf geometry, the 'calf ratio' was calculated by dividing the largest by the smallest circumferences of the calf. All parameters were compared between TCC and SC for each subject in each of the two conditions. Paired t-tests were used to evaluate significance, which was set at a level of p < 0.006 due to the Bonferroni Correction.
RESULTS: Removal of the shank portion of the TCC significantly increased the average plantar force by 31% during walking. The force only increased 9% during standing, which was not significant. Peak pressure increased 53% after removal of the shank portion of the TCC during walking. Peak pressure was not significantly different during standing on one limb. No correlation was found between the calf ratio and the magnitude of change in the measured values.
CONCLUSIONS: These results help to partially explain the widely recognized clinical observation that molded insoles and shoes, no matter how well conformed to the foot, do not reduce plantar loads as effectively as a total contact cast. The mechanism appears to be a critical unloading function of the proximal, 'shank' portion of the cast, presumably due to reduction in ankle motion.
Unloading mechanism in the total contact cast.
Linear Mode
